UNSOLVED

Claude935

updated

20 years ago

C

Claude935

14 Posts

0

4578

February 13th, 2007 16:00

Hard drive

I ordered my 9200 with Vista Home Premium
with 2 disk drives of 250G, but what I have seem to be only one disk 500G
1 JX718

HARD DRIVE, 250G, S2, 7.2K, 3.5, WD-HAWK

 

HARD DRIVE, 250G, S2, 7.2K, 3.5, WD-HAWK again 1 JX718

 

Is this a Vista problem or is there a way for me to see the 2 drives

I have partition disk C but cannot backup into the new partition, because it is same disk

Main reason for the two disks was to have enough space to backup documents that I work with everyday, and I need to make sure, I dont lose them

Thanks

  • PETER345

    1 Rookie

    •

    5796 Posts

    152

    0

    Posted February 13th, 2007 16:00

    Did you get RAID 0 (striping)? Then your two HDs would appear as a single drive, but higher performance because you can read/write to the two drives in parallel.

    The 9200 RAID BIOS will show you how the drives are configured when you boot.

    Peter
  • Claude935

    14 Posts

    152

    0

    Posted February 13th, 2007 18:00

    I will have a look as I did not change anything
    This is the way it just came from Dell
     
    Thanks