UNSOLVED

rathje40

updated

16 years ago

R

rathje40

10 Posts

0

660

April 3rd, 2011 11:00

Configure for RAID?

I have a Dimension 9200 with a couple 250GB drives configured for RAID 0.  I know that makes me an idiot, in fact one of the drives went bad.  Fortunately, I take image backups periodically.  My problem is that I decided to replace the drives with a couple of Seagate Barrcuda 1TB drives.  When the system comes up, the drives are reported as "Non-RAID drives".  What to I need to do to get the system to use them in the RAID array?

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    129

    0

    Posted April 3rd, 2011 11:00

    The trip is usually CTRL-i before Windows begins loading.