2nd Hard drive -- Cable select vs. Master/Slave questions
I bought a Dell 2400 desktop a couple of months ago. It came with a 80 GB hard drive. I'm planning on adding a second 80 GB hard drive (Western Digital) to use for storing videos for editing and burning to DVD. I don't understand the difference between Cable select hookup and Master/Slave hookup.
Which one is better? What is the difference? The instructions that came with the WD hard drive have a diagram that supposedly indicates which setup your existing computer/hard drive is capable of. However, the diagram (2 rows of 5 small pins) does not match my existing hard drive configuration (2 rows of 4 small pins) -- Supposedly the placement of the 'shunt' (or whatever it's called) in this configuration identifies it as cable select or master/slave.
Can anyone help me out here with info or links to where I can figure this out? Thanks.
"Cable Select" cables will work just fine with Master/Slave configurations. There's no performance difference between M/S and CS, and CS is 'easier' if you want to swap devices around. I'd try CS first and only go with M/S if CS didn't work for some reason.
shesagordie
12 Elder
•
46017 Posts
429
0
Posted February 25th, 2004 15:00
Larryboy.
Dell uses Cable Select on their IDE drives.
http://support.dell.com/us/en/kb/document.asp?DN=FA1036724
Bev.