I get an email like this every day from my server: SupportAssist Enterprise is unable to add the device because the device credentials are incorrect, incomplete, or not provided.
But when I go to the server, I cannot fix it. The device collection shows failure, but there is no place to enter credentials.
I am also getting this error, though it's for a device that has already been added. The device's status is "Failed", and the error code along with SA-9000 appear on the device details flyout panel. Some form of communication is working, because SA Enterprise was able to query the OS version, model, service tag. I was able to remotely install OMSA and SNMP (both of those were already installed, but SA Enterprise tried anyway and reported success).
This error appeared after I installed "Dell EMC iDRAC Service Module Intaller for OS DUP, v3.4.0". Prior to installing that, I was troubleshooting much the same issue except that the error I was given was SA-9025.
I deleted the device and created it again. This time I am not getting SA-0145, but am getting SA-9025 again. It seems my issue is off-topic in this thread.
I guess this is already known, but the manual mentions this:
SA-9025 SupportAssist Enterprise is unable to run the script file because of one of the following:
1 You may not have superuser privileges on the system.
2 You have not entered the Management Server IP address.
3 Network sharing might be disabled.
Perform the following:
1 Ensure that you have superuser privileges on the system.
2 Enter the Management Server IP address.
We aren't using the credential profile and also I have verified that the credentials are correct. I think, you are referring to discovery in the openmanage. How to check if the device discovery is set manual or via adapter in the openmanage? I can see that the device on which we have encountered this has completed discovery.
manual discovery means, in SupportAssist Enterprise you go to the Devices pane and click the add device button. Via adapter, well, in this case, check the Extensions tab and manage your adapters, if you have one there, you discovered the systems via an adapter.
RoosRafaela
1 Message
6272
0
Posted March 27th, 2019 05:00
Hi I also have the same problem for weeks. Tried many things without results. And there is almost no response from Dell or whatsoever.