make sure that the printer is in fax mode, press menu until it says advance fax,select.
press menu again until it says max send speed, select,
press the left or right arrow to lower down the baud rate, suggested is 14400,select.
I already tried putting it at 14400 and it still is showing a "remote fax error". Do you know what that even means??? Any more advice is really needed. I am losing faxes more and more every day.
That error means your fax machine is not receiving data stream confirmation from the remote (other end) fax machine. It is probably a problem with the phone line. Is it a DSL line with a filter or a standard phone line? If you connect a regular phone to it, do you hear any static? On a service call, I would test the dB levels of the phone line and recommend based on that, but you can't do that, aside from calling your telcom provider.
redrum2k
152 Posts
720
0
Posted September 26th, 2006 04:00
press menu again until it says max send speed, select,
press the left or right arrow to lower down the baud rate, suggested is 14400,select.