UNSOLVED

lkod

updated

19 years ago

L

lkod

33 Posts

0

10628

October 30th, 2007 19:00

A940 Print Cartridge Errors

I have a A940 every time i try to print i get a printer error on the led screen that says
Error: 50C . Consult owners manual. 
 
I don't find anything on it in my owners manual or on the online owners manual.
 
i updated the firmware for it it printed one page and did it agian. 
 
the error wont clear with rebooting the printer.  I did not try to re boot the computer itself. 
 
the cartridges appear fine to me.  I removed and reseated both.
 
what now.
  • 217

    0

    Posted November 2nd, 2007 15:00

    Try turning off both the printer and the PC.

    Then power both back on and see if that resolves the issue.

    If not, turn off the printer and then completely disconnect it from the PC and see if it will print a test page without being connected to the PC.

    If it does, then the printer itself is working properly.

    Then from there we can begin to determine what is causing the problem with the printer is attached to the PC.
  • 217

    0

    Posted November 2nd, 2007 18:00

    I haven't had a problem with ink cartridges personally but from what I understand it is a fairly common issue.

    Per Fireberd there is a good chance this will fix your issue:

    Try cleaning the inkjet nozzles on the cartridge. They can become clogged. Soak the nozzle end of the cartridge in a shallow container of warm (not hot) water for about 10 to 15 minutes. Blot the cartridge dry and reinstall. If it works great, if not you are looking at a new cartridge.

    If this doesn't work let us know and we can keep trying.

    Message Edited by Mike_n_Nashville on 11-02-2007 02:37 PM
  • lkod

    33 Posts

    217

    0

    Posted November 2nd, 2007 18:00

    I did as you requested.  I turned off computer and printer and rebooted both.  I no longer have a print cartridge error.  The printer will print pages with nothing on it.  It said my ink cartridges are low.  I just changed them about two months ago it always says it is low and prints fine.  I bet i have less than 100 pages printed on these cartridges.  Any idea's?
  • lkod

    33 Posts

    217

    0

    Posted November 5th, 2007 19:00

    i cleaned the cartridges and now when i print it says the cartridges are full but it still prints a blank page.  when i run paper across the cartridge it dispenses ink on the paper it just wont print when in the printer. 
     
    I tryed to copy something as well it does not work that way either.
     
    I also got the 50C printer cartridge error agian.