I am looking for suggestions on configuring a PE6650+PV220S.
The PE6650 has 5x146GB drives. The PV220s has 14x146GB drives, Redundant PW Suplies and two EMM's.
I have replaced the Perc3/DC that came with the PE6650 with a Perc4/DC and I have installed a second Perc4/DC in it to connect to the PV220s.
Can I add a 3rd Perc4/DC and connect it to the second EMM on the PV220s to provide a redundant path from the PE6650 to the PV220?
What is the best way to configure this combination to provide:
1. Redundant paths to the data from the PE6650?
2. Best Performance?
The PV220 docs indicate enabling clustering disables access to the drive in slot 14. Since the drive can't be accessed, can you remove drive from the carrier and leave it empty?
What is the best way configure the RAID5 Array on the PV220?
1. One large RAID5 array using all available drives?
2. Two arrays, one with 6 drives and one with 7?
3. What about Hotspares? One or Two?
>>What is the best way to configure this combination to provide
- It really depends on your circumstance... If you have three PERC4 cards, then you are already in position to connect the PV220s on the 2nd PERC and the 3rd PERC.
>>What is the best way configure the RAID5 Array on the PV220?
- You seem to desire for fast performance but you also want RAID5...? As far as I can understand, your 220s is really dedicated for the 6650, so why not use duplex SCSI configuration?
dooza
2 Posts
318
0
Posted October 11th, 2004 01:00