UNSOLVED

cdottrot

updated

20 years ago

C

cdottrot

3 Posts

0

6186

December 1st, 2006 16:00

PowerVault 110T too hot?

We have a PV110T tape drive that might be getting too warm. When you take the tapes out after a backup, they are almost too hot to touch. Is this normal?

The unit is situated in a rack that is very well ventilated and there is an A/C unit in the room. Average room temperature is 27-28C.

The unit is also about 6 months old and brand new. All of the tapes are new as well, and according to a quick internet search, the max operating temperature is 45C.

Any input would be appreciated.
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    233

    0

    Posted December 1st, 2006 16:00

    Most of the server rooms I work with/in are usually around 20 degrees celcius (68-70 degrees Fahrenheit).
  • tgoetzman

    1 Rookie

    •

    66 Posts

    233

    0

    Posted December 1st, 2006 18:00

    I have many of the LTO-1 external drives deployed, and warm yes, but never to hot to touch. You will probably need a good thermometer to measure the temperature of a tape when you remove it in order to prove to DELL that it is too hot and needs replacing.
  • SSEiYah

    21 Posts

    233

    0

    Posted December 4th, 2006 01:00



    @tgoetzman wrote:
    I have many of the LTO-1 external drives deployed, and warm yes, but never to hot to touch. You will probably need a good thermometer to measure the temperature of a tape when you remove it in order to prove to DELL that it is too hot and needs replacing.






    I like the way this guy thinks....Yes good ideas.
  • cdottrot

    3 Posts

    233

    0

    Posted December 4th, 2006 15:00

    Thanks for the replies all. Our A/C was serviced this past weekend and now the temperature is around 21C. Turns out the intake was clogged or somesuch.

    I'll look into getting a IR thermometer to test should the trend continue.

    Thanks again!
  • cdottrot

    3 Posts

    233

    0

    Posted December 6th, 2006 13:00

    The answer is embarassingly obvious:

    Fans work better when they're not broken.

    I was checking airflow when I noticed the lack of intake...then around back...no exhaust. After using a laser pointer as an improvised flashlight, I discovered that the fan blades were motionless!

    We'll be speaking with Dell about this.