Hello Bagek,

Here is a link to the Simplex to Duplex mode guide that will walk you through adding a second controller. downloads.dell.com/.../powervault-md3200_user%27s%20guide3_en-us.pdf

Please let us know if you have any other questions.

Hello Bagek,

Here is a link to the Simplex to Duplex mode guide that will walk you through adding a second controller. http://downloads.dell.com/manuals/common/powervault-md3200_user%27s%20guide3_en-us.pdf

Please let us know if you have any other questions.

Hello,

i have the same problem, i have an empty place for the second controler ... 

The link describe for add for a new enclosure, it is the same method to add a second controler?

thanks

Hello Rody1717,

If you are running your MD3200i in simplex mode then all you need to do is to add the controller and follow the steps listed in the link. If you don’t have any expansion enclosure attached to your MD3200i then you don’t need to be worried about that part.

Please let us know if you have any other questions.

Hello Sam,

Would this be the same procedure done if a second controller failed on MD3200i and I replaced it with the same model?