Yes this is what my issue is and one of my colleagues cabled it i would say not correct. iSCSI traffic and NVME traffic go from the same port from ESXi host
Based on this we are supposed to use exactly these ports for NVME TCP/IP traffic
Cluster network is 25 GBps but as you can see I/O module ports are only 10 GBps which is not recommended for NVME TCP network
ALso from our blade chassis iSCSI and NVME traffic are going through the same virtual interconnect which I think it is wrong. I think should be 25 GBps on IO modules
And as far as I understand storage IO requests dont go through cluster network but via IO modules however to me looks like Cluster is managing IO which would be first time not sure if I understand cabling
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
0
0
Posted December 5th, 2023 14:05
Hi,
Thanks for your question.
Are they going to the same Vmotion target? Are the ISCSI and TCP networks using the same switches? It sounds like an issue in the networking.
Let us know if you have any additional questions.