UNSOLVED

gkleynhans

updated

15 years ago

0

3456

May 22nd, 2012 07:00

Where can I obtain util emcpowerreset?

Hi

Following a power crash on an AIX 5L system with CX400 storage, an hdiskpowerX disk is no longer accessible.

Although I do not find any reference in the EMC CLARiiON documentation that I have available, http://santosh-aix.blogspot.com/2010/08/emc-grab.html refers to a utility named 'emcpowerreset' that might resolve this problem by resetting the reservation bit on the device.

The EMC Symmetrix AIX Support Software installed on the system (fileset Symmetrix.aix.rte 5.0.0.0) does not contain util 'emcpowerreset'.

The files included in this fileset are as follows:

Path: /usr/lib/objrepos

  Symmetrix.aix.rte 5.0.0.0

                        /usr/lib/nls/msg/en_US/sym.cat

                        /usr/lpp/Symmetrix/bin/inq

                        /usr/lpp/Symmetrix/bin/rsnodecfg

                        /usr/lpp/Symmetrix/bin/mkbcv

                        /usr/lpp/Symmetrix/bin/rmbcv

                        /usr/lpp/Symmetrix/bin/emc_cfgmgr

                        /usr/lib/methods/sym.cat

Path: /etc/objrepos

  Symmetrix.aix.rte 5.0.0.0

                        NONE

I also could not find a download link for util 'emcpowerreset'.

I will appreciate any assistance.

Regards,

Gerhard Kleynhans

  • 1404

    0

    Posted May 30th, 2012 07:00

    Hello Anit,

    No, it is not a HACMP cluster.

    Regards,

    Gerhard

  • AmtGupta1

    24 Posts

    1404

    0

    Posted May 30th, 2012 07:00

    Hello Gerhard,

    Is it a HACMP cluster?

    Regards,

    Amit

  • AmtGupta1

    24 Posts

    1404

    1

    Posted May 31st, 2012 00:00

    Hello Gerhard,

    This utility is for releasing the locks in clusters. Please collect SPcollects and emcgrabs and open a ticket with Powerpath group, they should be able to help you..

    Regards,

    Amit

  • AmtGupta1

    24 Posts

    1404

    0

    Posted June 1st, 2012 01:00

    Hello Gerhard,

    did you get a chance to open up an SR?

    Regards,

    Amit   

  • 1404

    0

    Posted June 1st, 2012 04:00

    Hello Amit,

    Thank you for your interest.

    The problem that I have is that on powerlink.emc.com I only have access with

    'Powerlink Lite View'. As such I do not have access to open an SR.

    The requirements for access are described as follows on

    https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanage

    r/km/secureDesktop?_nfpb=true

    er/km/secureDesktop?_nfpb=true&_pageLabel=promotionRequirementPgContentBk>

    &_pageLabel=promotionRequirementPgContentBk:

    The difference between limited Powerlink accounts and full-access accounts:

    *

    A limited account provides access to the Powerlink site and a subset of its

    resources. Limited accounts are available to users who do not meet the

    requirements for a full-access account (see requirements below).

    *

    A full-access account provides access to a range of tools, resources,

    documentation, software downloads, training, and more.

    Requirements for a full-access Powerlink account:

    *

    You must work for a company that is an existing customer, partner, or

    supplier of EMC.

    *

    The information you provide (including company information, business e-mail

    address, and type of business relationship with EMC) must all match the

    information we have on record for your company.

    I did previously attempt to obtain full-access privileges on my account.

    However, since we purchased our two dual-node Escala PL420-R systems

    integrated with CX400 storage systems via resellers (one system was in fact

    purchased second-hand), the Powerlink account registry does not list our

    company as either customer, partner or supplier of EMC and for this reason

    an upgrade of my account to full-access privileges have been repeatedly

    refused.

    This is very frustrating, since we own and operate these systems containing

    EMC CX400 storage systems and we have no avenue to obtain support from EMC

    Support. We have been operating this way for years now. The only avenue that

    I currently have for support for our EMC CX400 systems is Googling and this

    forum. This frustration has led me to the point of advising my management (I

    am data center manager for data-processing services hosted by a private

    company for government agencies) to steer clear of considering any future

    procurement of computing equipment that contains EMC storage.

    Your suggestion yesterday that I open an SR, did prompt me to try once again

    to obtain access to EMC Support. I did fill out a web form at

    http://emcinformation.com/contact_en/REG/.ashx with an enquiry to how we may

    obtain EMC support. I have not yet received any response. I think you will

    understand that I do not have high hopes for obtaining an avenue to EMC

    Support.

    Regards,

    Gerhard

  • AmtGupta1

    24 Posts

    1404

    0

    Posted June 1st, 2012 05:00

    Hello Gerhard,

    Sorry for all this nightmare. Could you send following information to powerlink@emc.com and see if they can help you.

    site id,

    address,

    point of contact,

    telephone number

    In the meantime, please see following KB articles

    http://csgateway.emc.com/primus.asp?id=emc198155

    http://csgateway.emc.com/primus.asp?id=emc997234

    http://csgateway.emc.com/primus.asp?id=emc2242008

    Let me know how it goes..

    Regards,

    Amit

  • 1404

    0

    Posted June 1st, 2012 06:00

    Hello Amit,

    Thank you very much for your assistance and for the information provided.

    I sent an email to powerlink@emc.com with the details as advised and I am

    awaiting response.

    I will also review the knowledge base references that you sent on usage of

    the 'emcpowerreset' utility.

    Sitting with a failed hdiskpowerx device without support last week, I

    decided to recreate the failed VG and hdiskpowerx device (etc, etc) last

    week and restored over 650 GB of data. The system being fully operational

    again, my focus is now on trying to get EMC support place for the future and

    to then to review with EMC Support how this serious type of event (loss of

    PVID of hdiskpowerx device following power crash) can be handled in the

    future without time-consuming data recovery.

    I did run emcgrab while the failure existed and I can send the output

    archive to EMC Support for analysis, once access to EMC Support has been

    arranged.

    Regards,

    Gerhard

  • AmtGupta1

    24 Posts

    1404

    0

    Posted June 1st, 2012 07:00

    Hell Gerhard,

    Hopefully, you should get access to Powerlink. While you are waiting for EMC Powerlink team, I'll also suggest you to get in touch with your reseller and ask him to help you to your Clariion registered with EMC, so that process could be a bit easier.

    Let me know if there is anything else I could help you