I have a VMware install with the SVM's holding all other roles besides SDC. These SVM's are Suse 11.3. Now moving to a 5 node cluster I wanted to add an MDM as a standalone physical server outside of the VMware servers. Suse 11.3 is no longer available for download so I downloaded Ubuntu 14.04.
Is this mismatch of Linux distro's supported especially in the gateway?
I ask because it seems the Gateway won't run the 5 node install of the additional components because it is trying to use root and the password which is fine with Remote login as root on Suse but prohibited in Ubuntu. I manually installed the LIA on the Ubuntu server as well to rule out the bad password error coming from LIA.
If this isn't going to work, is it going to work if I use Suse 12.0 mixxed with 11.3 for existing components.
It seems there is no clear requirements docs on mixed component environments.
you can set the password for the root user in Ubuntu 14.04:
- login to ubuntu server using your current admin user
- type: "sudo su -"
- The system ask for the password of the current admin user
- Now you are root. Issue the command: "passwd root" in order to set the password for the root user
- Make sure the ssh server is installed otherwise issue the command: "apt-get install ssh"
- Edit the file: "/etc/ssh/sshd_config" with your preferred editor and change the line: "PermitRootLogin without-password" to "PermitRootLogin yes"
- Restart the ssh service issuing the command: "/etc/init.d/ssh restart"
- Now you can install the components using the ScaleIO installer on your Ubuntu 14.04
If you need the SDC role on the current Ubuntu 14.04 there is an issue because there is a kernel version mismatch with the compiled version of the scini module distributed with ScaleIO 2.0.0.1. The module is built for kernel version 4.4.0-15 that was removed in the current branch of ubuntu 14.04. In case you need to run the SDC role write again here, I will share with you the 4 original ubuntu kernel packages for Ubuntu 14.04. In that case you can install them using dpkg -i .
I actually figured out that to be the best solution as well while this post was waiting to be moderated as well as your response.
I won't have the SDC role on this server but did notice those gotcha's in the Deployment guide as well as some commented out lines in the gateway for getting packages from EMC repository for the SDC's.
I appreciate your time as it confirms my idea that I haven't tested beyond altering the /etc/ssh/sshd_config and testing logging in. I will perform the upgrade test again after hours.
I read you don't need SDC on Ubuntu 14.04 but I give you instructions to install the kernel version that is compatible with SDC kernel module (scini) distributed with ScaleIO version 2.0.0.1.
1) Download from here the Ubuntu 14.04 packages of kernel 4.4.0-15, they aren't available from ubuntu repository because Ubuntu removed them some time ago. You can find the needed package here:
3) Lock the packages upgrade for these packages running the command (on a single line):
apt-mark hold linux-headers-4.4.0-15 linux-headers-4.4.0-15-generic linux-image-4.4.0-15-generic linux-image-extra-4.4.0-15-generic
In that way you prevent upgrade of these packages running apt-get update, apt-get upgrade
4) (Optional) Remove old kernel version so at boot the system has only a single kernel version to boot from and won't ask you what kernel you would like to use. The command I will send you is for Ubuntu 14.04.5 fully updated (kernel version 3.13.0-95). If you have another kernel version you need to correct the package names to be removed. That is the command (on a single line):
Also if I don't need SDC on Linux I prefer to keep the kernel version aligned to the version that was used by ScaleIO developer because, going this way, I'm sure that the system is perfectly aligned with requirements. I'm sure that using the old 3.13.0-95 version or the latest Ubuntu released 4.4.0-34 SDC module can't be loaded and that SDS seems to work. Since we are sure that ScaleIO was compiled and certified with the kernel version 4.4.0-15 (on Ubuntu 14.04) I prefer to use this version also for "SDS only" installations.
you kernel version is 4.4.0-34, the scini module is built for 4.4.0-15. You have to follow the procedure I sent in the previous post to install the matching kernel version. I think you don't have to reinstall SDC, probably is sufficient to install the right kernel packages and to boot the system with the kernel version 4.4.0-15.
If you want to remove the kernel version 4.4.0-34 after installing the 4.4.0-15 (optional operation) you have to correct the last command I provided: "apt-get remove --purge ..." matching kernel version 4.4.0-34.
I think that, if you installed the generic flavor of the kernel, the last command I provided in my procedure must be corrected this way:
Maybe the command needs some tuning, I suggest to double check the relative to kernel version 4.4.0-34 installed on your system to fine tune the "apt-get remove --purge ..." command.
Thanks for the detailed reply. However, changing the kernel version is not an option for me.
I did find the scini driver module for kernel 4.4.0-34 and SDC 2.0-5014 in the EMC ftp repo. Just replacing the scini.ko file and restart of service did the trick. No re-install or reboot required.
There is a driver_sync.sh utility which ships with EMC package which is supposed to get this utility from EMC's repository by ftp. There is a separate section for Ubuntu hosts in the deployment guide. The same document also has the credentials for the ftp site.
c0redump
68 Posts
2388
0
Posted August 31st, 2016 17:00
Hello carterbury1,
you can set the password for the root user in Ubuntu 14.04:
- login to ubuntu server using your current admin user
- type: "sudo su -"
- The system ask for the password of the current admin user
- Now you are root. Issue the command: "passwd root" in order to set the password for the root user
- Make sure the ssh server is installed otherwise issue the command: "apt-get install ssh"
- Edit the file: "/etc/ssh/sshd_config" with your preferred editor and change the line: "PermitRootLogin without-password" to "PermitRootLogin yes"
- Restart the ssh service issuing the command: "/etc/init.d/ssh restart"
- Now you can install the components using the ScaleIO installer on your Ubuntu 14.04
If you need the SDC role on the current Ubuntu 14.04 there is an issue because there is a kernel version mismatch with the compiled version of the scini module distributed with ScaleIO 2.0.0.1. The module is built for kernel version 4.4.0-15 that was removed in the current branch of ubuntu 14.04. In case you need to run the SDC role write again here, I will share with you the 4 original ubuntu kernel packages for Ubuntu 14.04. In that case you can install them using dpkg -i .
Davide