I try to deploy 3 node cluster of ScaleIO, upload and install packages phases goes well, but on configure phase I receive error and don't have a clue how to fix this:
Command failed: Could not add TB 10.10.50.138 on 10.10.50.136,10.10.50.135 due to: Communication error
{
"mdmIPs": [
"10.10.50.136",
"10.10.50.135"
],
"mdmPassword": "xxxxx",
"tb": {
"node": {
"ostype": "linux",
"nodeName": null,
"nodeIPs": [
"10.10.50.138"
],
"domain": null,
"userName": "root",
"password": "xxxxx",
"liaPassword": "xxxxx"
},
"nodeInfo": {
"diskDevices": [
{
"diskName": "/dev/xvdb"
},
{
"diskName": "/dev/xvda"
},
{
"diskName": "/dev/sr0"
},
{
"diskName": "/dev/xvda1"
}
],
"installedComponents": [],
"osType": "linux",
"linuxFlavour": "rhel7",
"pythonInstalled": true,
"timestamp": "2016-01-22T12:39:21.330Z"
},
"tbIPs": [
"10.10.50.138"
]
},
"commandState": "failed",
"startTime": "2016-01-22T12:53:11.069Z",
"message": "Command failed: Could not add TB 10.10.50.138 on 10.10.50.136,10.10.50.135 due to: Communication error",
When specifying SDS device path on a Linux node in CSV file, the user should use the path according to what's written in '/proc/partitions' (and not according to 'fdisk -l')
PowerFlex Mark
40 Posts
461
0
Posted January 22nd, 2016 07:00
There is a KB article which is a decent match for the issue faced. Please review the attached article and confirm if its relevant to you.
1 Attachment
KB_BreakFix_Printable_PDF.pdf
KB_BreakFix_Printable_PDF.pdf