our old DELL PowerEdge 2850 is slowly giving up under pressure.
So, we got the R210 II as a replacement.
My question is, can I install Windows Server 2003 Standard Edition Service Pack 2, on the new R210 II, in order to just place the image I have of the PowerEdge 2850 that I have, with all applications?!?
Or do I need to install windows 2008, and install every application manually?!?
Server 2003 is not supported on the R210 II by Dell, and I don't believe the chipset is compatible at all. Seems like others have tried unsuccessfully to install it. Your [best] alternative to installing a modern OS and setting it up manually is to virtualize your 2850/2003 server to run on the R210 II.
The Symantec CD probably doesn't include the driver for the raid controller on your 2850 and therefor doesn't see any storage.
Are you wanting to run the 2003 OS as a virtual machine on your Windows 2008? If so, did you enable hyper-v or are you wanting to use VMware Virtual Server, VMware Workstation, or some other virtualization software solution?
The answer to this may provide alternate options to move your data/image (e.g. VMware P2V converter).
I just wanted to use the Symantec 2011 CD to backup the server with the 2008 installed.
I also thought it was lacking the driver for the RAID controller, but when I try and use the driver that worked for the installation of Windows Server 2008, the SSR CD tells me that it is a 64bit driver (and on the DELL site it clearly said it was a x86 driver).
Any ideas what to try next?!?
This is my first step, in order to get things moving for the transfer of the programs and applications...
The driver you need will be based on the WinPE OS used in the Symantec 2011 CD. I would not expect it to be a 64 bit OS. Try to determine the version of the OS on the CD and download the appropriate driver for it ( possibly Win2003/XP x86 ?).
Looking at the installed Win2008 OS you can determine the DEV_xxxx and VEN_xxxx numbers for the device from the propertities and using the OS info above download the correct driver. I forgot to look, is the installed OS Win2008 x86 / Win2008 x64 / or Win2008 R2 ? Also, in the past we have seen problems with some Intel .INF driver files that incorrectly identify the target architecture of the driver but i wouldn't suspect that first off...
From there you can use the MS DISM to inject the driver into the .wim of a copy of the CD or point to it on every reboot with the exisiting CD.
theflash1932
11 Legend
•
16255 Posts
536
0
Posted August 5th, 2013 06:00
Server 2003 is not supported on the R210 II by Dell, and I don't believe the chipset is compatible at all. Seems like others have tried unsuccessfully to install it. Your [best] alternative to installing a modern OS and setting it up manually is to virtualize your 2850/2003 server to run on the R210 II.