I purchased a T340 tower but skimped a bit on the raid controller since we don't have a heavy storage workload. I got 4 SATA drives configured in hot swap bays, and it has a SAS backplane (0101F2V00-000-G) to support that. 4 of the slots are wired, and the bottom 4 are not connected. The SATA drives are configured in a RAID 5 configuration.
I have Windows Server 2019 Standard, and the system absolutely crawls. Services and applications show as unresponsive while starting up, and the performance of this system is unacceptable. In fact it's slower than the T320 it's replacing, which is similarly configured but has an H710.
This server sat in a box for a bit after it was ordered, and because of that I'm past the return window. The official documentation states that there is no APOS kit for the update.
I'm wondering what I need to do to upgrade this server to a hardware raid PERC, like the H730. Since I already have the backplane and some amount of cabling for it, it almost seems like I just need the card. I'm not worried about losing the existing volumes. What do I need to purchase to update this server to what I should have ordered in the first place?
The server can support H730P, which is PN# X4TTX. The cable that you need is PN# X2N98. You can't use the existing cables due to the PERC ports are 12Gb/s. Just to make sure, you're using the backplane PN# V0RX3 right? Well, that's the only backplane for T340, but I'll just need to make sure. Other than that, it's pretty much it. Here a reference for you in case if you are missing any other cables, let me know: https://dell.to/2SOoDl7;
About virtual disk migration, H730P would not be able accept disk migration from S140, only from hardware PERCs, here's the reference: https://dell.to/33Q0qkL Page 28. Also, based on the documentation of H730P, Windows Server 2019 is not validated.
Let me know if you have any other questions.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.
Thanks Joey! I confirmed the board is PN V0RX3. Just to confirm, is cable X2N98 the same cable used for the bottom half of the backplane to the PERC?
Also, I found a document related to Windows Server 2019 driver support for Dell's various raid controllers, and there was a driver in that document targeted at 2019 support for the H730p. Does that ring a bell?
Thanks guys, this is exactly what I needed. I've already gotten with Sales for these P/N's and I imagine this will be an easy upgrade. Much appreciated
Thank you. How can we procure an X2N98 cable? We've been in touch with sales, and they're looking, but they were unable to find it on their "regular" part list... so they've contacted "Spare Parts." ???
I am in this same situation now, but I have a quick question. Would that cable mentioned to work with the H730P also work just on the S140 to enable the additional ports on the backplane? I have ordered the H730P already but am just curious it this is another option.
So is it possible to enable all 8 ports on the backplane using the S140? The manual says the S140 supports up to 12 drives. As I said, I've already ordered the H730P but I'm curious about why Dell would not include support for both rows of the backplane with the server.
DELL-Joey C
Moderator
•
4170 Posts
•
20965 Points
2367
1
Posted October 12th, 2020 23:00
Hi,
The server can support H730P, which is PN# X4TTX. The cable that you need is PN# X2N98. You can't use the existing cables due to the PERC ports are 12Gb/s. Just to make sure, you're using the backplane PN# V0RX3 right? Well, that's the only backplane for T340, but I'll just need to make sure. Other than that, it's pretty much it. Here a reference for you in case if you are missing any other cables, let me know: https://dell.to/2SOoDl7;
About virtual disk migration, H730P would not be able accept disk migration from S140, only from hardware PERCs, here's the reference: https://dell.to/33Q0qkL Page 28. Also, based on the documentation of H730P, Windows Server 2019 is not validated.
Let me know if you have any other questions.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.