UNSOLVED
B
bse_390872
3 Posts
0
1872
August 13th, 2004 01:00
relabel / format SCSI drive
I have (3) WDE 4360 SCSI drives in my PowerEdge 4100/200 server.
All three when installed were "READY" to be configured by the RAID Controler but only two of the drives can be configured.
The third drive is labeled "Enterprise", that was done by the previous owner, How can I reformat it and remove the label so that I can use the drive, or is it dead, how can I find out?
Thanks
BSE
TechMatt
73 Posts
219
0
Posted August 13th, 2004 10:00
If there is already a container on it get rid of it.
is it an adaptec raid controller? Initialize the drive if it is, thatll remove it.