UNSOLVED

wazzu62

updated

11 years ago

W

wazzu62

15 Posts

0

56205

January 25th, 2016 14:00

Perc 6/ir question

I have a PE720 with a PERC 6/ir controller.

I have two 1.0 TB drives set up a a RAID-1 mirror.  One drive is going bad and the mirror is trying to re-sync but I don't think it will finish because of the failing drive.

Can I break the mirror in the controller BIOS and establish a single RAID-0 stripe with the one good drive?  My fear is when I add the single RAID-0 stripe the controller will initialize the drive and my data will be gone.

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    404

    0

    Posted January 25th, 2016 16:00

    Hi,

    You do not need to change the RAID level. Just disconnect the failing drive and you should be able to boot to the other drive.

  • theflash1932

    11 Legend

    •

    16255 Posts

    404

    0

    Posted January 25th, 2016 17:00

    Yes, you can "boot" to the other drive, but it will only run in a degraded status. You can't change it to a RAID 0 and have it run "optimally".

  • theflash1932

    11 Legend

    •

    16255 Posts

    404

    0

    Posted January 25th, 2016 17:00

    There is no such thing as a PERC 6/ir. There is a PERC 6/i and a SAS 6/iR, neither of which are supported in an R720.

    To answer your question: No, you can't convert your RAID 1 to a single-disk RAID 0. You can reconfigure only to expand, by adding disks (and/or swapping for larger ones on the H7x0).