UNSOLVED
JS
January Smith
3 Posts
0
3115
June 10th, 2004 20:00
PERC 320/DC Can't Access Array#0
I have a 650 Workstation with a PERC 320/DC RAID 0 that has lost the ability to access Array#0.
When I use the BIOS config utility to Manage the Array, if I select the REJECT prompt and vieew it in Read-Only mode all the Array#0 details are visible. It indicates an Array Status of PHANTOM. However, when I choose the ACCEPT option on the config utility and attempt to manage the Array#0 I get an error message indicating 'No Arrays Present'. Both drives are there and check out OK when I Verify through the Disk Utitlty.
I have a new controller on the way. Any ideas?
Thanks,
January
When I use the BIOS config utility to Manage the Array, if I select the REJECT prompt and vieew it in Read-Only mode all the Array#0 details are visible. It indicates an Array Status of PHANTOM. However, when I choose the ACCEPT option on the config utility and attempt to manage the Array#0 I get an error message indicating 'No Arrays Present'. Both drives are there and check out OK when I Verify through the Disk Utitlty.
I have a new controller on the way. Any ideas?
Thanks,
January
