
UNSOLVED
PE2400 - raid disk replacement
Hi!
I want to replace the existing 18GB RAID1 SCSI disks on our PE2400 (service tag G4S200J) file server with new 36GB disks. I don't want to re-install the system as it's also a DC so I'm wondering if the following procedure will work. The system has 2 partitions, 4GB system, 14GB data.
1) Remove one of the disks from the RAID1-array, thus breaking the array redundancy.
2) Replace with a new 36GB disk.
3) Let the system rebuild the broken raid configuration with the new drive (thus leaving 18GB of unused disk space on that drive).
4) Remove the last 18GB drive and replace it with a new drive.
5) Repeat the rebuild procedure.
6) Create a new partition in the 18GB unused space (or perhaps delete the existing data partition and create a new one with 14+18GB space)
Will this procedure work? Are there any other ways to perform a similar disk replacement?
Regards,
Johan Sandqvist
Message Edited by koggen on 11-18-2003 02:32 PM
Responses (1)
Solutions (0)

mikebrla
5 Posts
91
0
Posted November 18th, 2003 18:00