How to bypass the 405-AAZE : PERC H755N Front RAID controller
I have a PowerEdge R7525 that currently has the 405-AAZE : PERC H755N Front RAID controller.
I am looking for the cables required to delete the PERC so I can direct-attach the 379-BDSX : NVMe Backplane to the 384-BCWO : PowerEdge R7525 Motherboard.
This backplane is 8xNVMe and has 4 cables connecting it to the PERC. Would the C47DK cable be appropriate? The set contains 2 cables, would I need two sets?
Which motherboard PCIe headers would I connect them all to?
My goal is to be able to directly address all 8 NVMe drives using 4x lanes per drive.
Joey, the cabling diagram is extremely useful, thanks.
On the page you referenced, Figure 8. 8 x 2.5-inch with NVMe is probably the desired configuration but I am not sure of the effects of removing the jumpers between SL1-SL3 and SL2-SL4. Figure 9 would also do the job, each seems to provide 32 PCIe lanes to the backplane.
This server previously had a GPU and Figure 12 represents the current cabling. The GPU was removed so I have plenty of free PCIe lanes to work with.
Can you help me identify the part numbers for the cables in Fig 8 and 9?
Figure 8 seems to be part number C47DK which contains 2 cables.
Correction, the cable set in figure 8 looks like Dell part number PGR7W. The labels on each cable end match what I see on the backplane and motherboard. Can you confirm that part number will work?
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
0
0
Posted December 3rd, 2024 21:14
PGR7W does look correct, and is also supported on the R7525 platform.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!