Solved!
Go to SolutionCan't Instal windows on server r250
Hi, I have server poweredge r250 and want to install windows server standard 2019 but it seems like I cannot Install it. This is because when want to install, it does not detect the Hard Disk (I used Raid 0). Also try change the hard disk to Non-Raid also cannot. My server details are:
Processor : Intel Xeon E-2324G 3.1Ghz
RAM: 8GB UDIMM, ECC
HDD: 1x2TB Hard Drive SATA
RAID: Perc H755 Raid controller Adapter
FYI, I already try with 1TB Hard Disk also cannot. I check at command prompt at repair my computer during windows installation to see whether it detect my Hard Disk or not, and the result is not detect. Already Update H755 firmware (update to 52.21.0-4606_A07) at lifecycle also same result. i downloaded the SAS-RAID_Firmware_RKC2R_WN64_52.21.0-4606_A07.EXE file
I also try with RAID mode, AHCI mode, and off. Below is the message i get when i check in command prompt
610
1
Posted November 30th, 2022 01:00
This could be a driver missing issue. Can you try to install the Operating system using LifeCycle Controller. You can refer below link for details
608
0
Posted November 30th, 2022 02:00
this one I also already done it, same result. when finished it says to reboot and press key to boot from cd. then same problem happens
Lepmad
1 Rookie
•
21 Posts
590
0
Posted November 30th, 2022 16:00
okay problem solved, I start with making raid in lifecycle then os deployment. Then when installation has the drive. But still wondering why that's happened. thanks for all the answers given. Really appreciate it