UNSOLVED

alhayaly

updated

13 years ago

A

alhayaly

9 Posts

0

32740

July 1st, 2013 09:00

Add RAID1 to Server already had RAID5

Hi Dears,

I'm new in administrator world and don't have experiences.. so i need your help.

I have file server [DELL PowerEdage 2950] with Controller PERC 5/i and RAID 5 [contain 5 SATA 232 GB HDD].

the problem is D drive almost full and i want to add more space by adding 1Tb HDD and mount it to biggest sub-folder in the network shared folder.

my question; Can i add RAID 1 as redundant for the 1Tb HDD , beside the RAID 5? and, can I mount the virtual disk on  RAID 1 to folder in RAID 5 Drive?

if yes i can, can you tell me how we can do this [RAID 1] through DELL OMSA .

thanks in advance and best regards,

  • alhayaly

    9 Posts

    702

    0

    Posted July 1st, 2013 09:00

    thanks for your answer  Josh..

    As you said i still have 3 empty slot to use, and i already bought two 1Tb HDD unit to be inserted if this applicable.

    server OS is windows server 2003 R2 with Sp2 .. and it roll is file server .

    Regards,

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    702

    0

    Posted July 1st, 2013 09:00

    Hi,

    Yes if you have enough available slots, if you have 5 drives in there currently with 3.5” drives you would only have 1 free slot, if it is 2.5” drives you would have 3 empty slots. You need two slots to create a RAID 1. How many slots do you have available? What OS is this running? Depending on the OS you may be able to mount the drive inside the existing drive.

  • alhayaly

    9 Posts

    703

    0

    Posted July 1st, 2013 09:00

    Dears .. i noted an interesting idea in theflas1932 rely .. thanks for both of you .

    Can I add an additional 250GB SATA disk to the RAID 5 without losing the data or need to new installation and restore the backup... is OMSA capable of expanding your 5-disk RAID 5 to a 6-disk RAID 5, on the fly, and while online.

    IS this possible ??

    regards,

  • theflash1932

    11 Legend

    •

    16255 Posts

    702

    0

    Posted July 1st, 2013 09:00

    No, you cannot mirror your RAID 5 to a single-disk RAID 0.  If you have a single 1TB disk, then the ONLY thing you can do with it is create a single-disk RAID 0 (unless you use Windows mirroring on top of the RAID, which is NOT recommended).  Because the OS will see this as a separate "disk",  you cannot combine its space with the space from the other "disk" (RAID 5), unless you convert the disks to dynamic (this also is NOT supported).  If you need additional space, you can create a single-disk RAID 0, copy data from D: to the new disk/partition, delete D:, rename new partition to D:.  OR you can add an additional 250GB SATA disk to your RAID 5 ... OMSA is capable of expanding your 5-disk RAID 5 to a 6-disk RAID 5, on the fly, and while online.

  • theflash1932

    11 Legend

    •

    16255 Posts

    703

    0

    Posted July 1st, 2013 09:00

    Then, yes, you can configure them in a RAID 1 along with the existing RAID 5.

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    703

    0

    Posted July 1st, 2013 09:00

    Great, then yes you can create a separate RAID 1 in server administrator.

     

    ftp://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_ent_sys_mgmt/dell-opnmang-srvr-admin-v7.2_User%27s%20Guide2_en-us.pdf starting on page 203 explains how to create a new array.

     

    With server 2003 once the array is created you can go to windows disk management and instead of assigning it a drive letter choose a mount point path and it will be a folder within the other drive letter.

  • alhayaly

    9 Posts

    702

    0

    Posted July 1st, 2013 09:00

    thanks for your reply ..

    i think my explanation was not clear enough . i don't want to change  RAID 5 , i just bought tow 1Tb HDD and want to put them in separate RAID 1 in the same controller.

    regards,

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    703

    0

    Posted July 1st, 2013 13:00

    Yes that is possible, however it will expand the array but not the windows partition, it will show up as unallocated space and then you can use windows diskpart or a 3rd party tool to expand the partition.

  • theflash1932

    11 Legend

    •

    16255 Posts

    703

    0

    Posted July 1st, 2013 14:00

    "is OMSA capable of expanding your 5-disk RAID 5 to a 6-disk RAID 5, on the fly, and while online."

    Yes, that is exactly what I said was possible ... that is by design.  As Josh said, you will need to fix the partitions once the "disk" has been expanded.

  • alhayaly

    9 Posts

    293

    0

    Posted July 2nd, 2013 01:00

    Hi,

    I just want to confirm that we can extend the RAID 5 on fly while the server online, and there is no need to move or restore the data from it.

    also, will be appreciated  if you can tell me from where we should start in OMSA to add the HDD and extend the RAID5 .

    best regards,