UNSOLVED
G
giorgio183
3 Posts
0
92000
December 1st, 2014 00:00
VRTX 10GB network , please help
Hello ,
i would like install a 10 GB connecction on my VRTX .
My VRTX have 4 blades , my question is ....
i have to install 4 10 gb cards each for every blade or one shared with all blades and how to assign a specific card to a specific blade as well one for all blades.
Thank you very much
Best regards from Italy
Giorgio
giorgio183
3 Posts
1910
0
Posted December 1st, 2014 09:00
hi
thank you for your answer, i have try to search a dell part with R1-2210 but nothing as results can you please indicate me a doc abouth this switch?
Thank you
Giorgio
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
1910
0
Posted December 1st, 2014 07:00
Giorgio183,
The VRTX will support using a 10GB I/O Module. The module needed is the Dell PowerEdge VRTX 10Gb R1-2210 switch module. It will allow you to accept up to 16 lanes from Fabric A and output six lanes to external ports (four 10 GbE SFP+ ports and two 1 GbE RJ-45 ports). You can find additional information regarding the modules here - http://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-vrtx_Owner%27s%20Manual_en-us.pdf
Let me know how it goes.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!