we have got new R760 with 2 x Xeon 4416+ CPU and it has originally 2 x DDR5 - 5600 RAM. when I try to put 8 or 16 RAM on it from other brand with same spec (5600 or 4800) I get below error : ( I have upgraded BIOS)
system. If the issues persist, replace the faulty Memory module identified in the message UEFI0339: The Dual Inline Memory Module (DIMM) in the memory slot B3 is disabled because of initialization errors Check the System Event Log (SEL) or the Lifecycle Controller (LC) Log and re-insert the Dual Inline Memory Module (DIMM) identified in the message into the same slot UEFI0401: Unable to use the system memory because the DIMMs are populated in an unsupported configuration) manner .Make sure that the DIMMs are populated as recommended, and then retry the operation. For information about correct population of DIMMs. see the server-specific installation and Service Manual available on the support site Available Actions: F1 to Continue and Retry Boot Order F2 for System Setup (BIOS) F10 for Lifecycle Controller - Enable/Configure DRAC Update Server Firmware - Help Install an Operating System F11 for Boot Manager DALL Technologies
we have tried all types. One RAM is ok but when we put second CPU the error come on B1 slot and with more than 2 RAM every time we get error on different DIMM slot, like B1, B3.
Hello, can you share a screenshot of the error you are facing? Can you tell us what memories that you are using? Have you tried what I suggested earlier for the OP? You can also send us your service tag if you like Direct Messaging | DELL Technologies (Please use DM for sending your service tag only)
Respectfully,
(edited)
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
Dear have u sole this issue in r760.i am also facing the same issue we alos have 2 xeon Gold processors 4th gen and 64gb 8 rams in qty 5600mt/s and its shows 320gb ram insted of 64×8=512gb.
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
0
0
Posted January 20th, 2025 06:35
Hello thanks for choosing Dell and welcome to our community.
I'd say you replace the B3 memory. (to see if the memory has an issue)
You can also try swapping test with the slot A3 memory. (to see if the slot has an issue)
Let us know how it goes.
Respectfully,
(edited)
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!