UNSOLVED
C
cochran008
2 Posts
0
9552
October 18th, 2006 09:00
DRAC5 - Timeout by connecting over vKVM
Hello,
we have a PowerEdge 2950 with DRAC5. Wenn i try to connet to the Server over the vKVM-Plugin comes the Message "There was an error connecting to the remote system. Reason: A timeout occurred".
I cann access the Webfrontent of DRAC. Why can i not access over the vKVM?
The Firewall on my Client is off.
bye
cochran008
we have a PowerEdge 2950 with DRAC5. Wenn i try to connet to the Server over the vKVM-Plugin comes the Message "There was an error connecting to the remote system. Reason: A timeout occurred".
I cann access the Webfrontent of DRAC. Why can i not access over the vKVM?
The Firewall on my Client is off.
bye
cochran008
cochran008
2 Posts
301
0
Posted October 20th, 2006 11:00
Hi,
> I need to know is this a permanent problem or sporadic?
i have use the DRAC card the first time. In the moment I can connect over the vKVM.
Bevore the last connect, I run the "Server Administrator" on the Remote Server. Makes the "Server Administrator" settings on the DRAC card?
Tanks.SteffenG_03082b
9 Posts
301
0
Posted October 24th, 2006 10:00
no running the ServerAdmin usually does not effect the DRAC card unless you use him to change the configuration under -> Main System Chassis -> Remote Acess -> Configuration.You should check if the needed ports 5900 and 5900 are open at the drac card. For this use telnet x.x.x.x 5900 (5901). If you can open a connection the port is open if you get the error: connect failed the ports are not open and you cant use the console redirection.As workaround you can use the racreset when the problem occurs. This should fix it. If the problem persists or it happens to often please contact your local dell support.
SteffenG_03082b
9 Posts
301
0
Posted October 20th, 2006 09:00