Help

Start a discussion
UNSOLVED

sly_cv

updated

16 years ago

S

sly_cv

3 Posts

0

153393

November 4th, 2010 07:00

Cooling needs of R710

I am trying to get an idea of how much cooling would be required for 5 Dell PowerEdge R710 servers with dual 870W power supplies.

The tech guidebook lists each power supply at 2968.6 BTU /hr, would this mean that each server would have approx 6000 BTU/hr?
http://www.dell.com/downloads/global/products/pedge/en/server-poweredge-r710-tech-guidebook.pdf

The Energy Star Data Sheet suggests with a dual power supply a thermal heat generation between 300 and 500 watts.
http://www.dell.com/downloads/global/products/pedge/en/Dell-PowerEdge-R710-2P-E5620-870W-Energy-Star-Data-Sheet.pdf

Which numbers should I use? Where can I get some numbers to give to our HVAC engineer?
  • D

    DELL_LanceB

    49 Posts

    3205

    0

    Posted November 4th, 2010 09:00

    If I read the guidebook correctly, each power supply at a maximum would produce 2968 BTU/hr. With 2 supplies this would be close to 6000 BTU/hr, but keep in mind this is a maximum value. You have the high output power supplies so the energy star sheet would not come into play. I would give you HVAC engineer the maximum values for the total number of servers you have or might have in the future. Then let the HVAC engineer determine what is appropriate for you space, they typically just need to know the BTU/hr as a heat load for your space. Also, be sure to include any network, monitor and other gear that would be on and possibly generating heat.
  • S

    sly_cv

    3 Posts

    3205

    0

    Posted November 4th, 2010 10:00

    Actually I found this Energy Smart Solution Advisor
    http://solutions.dell.com/dellstaronline/Launch.aspx/ESSA

    to be quite helpful. It suggested about 5500 BTU/hr for five servers.

Dell Support Resources

Latest Solutions

View More