I have an Inspiron 6000. It will connect wirelessly to my wireless network, and I can print documents on my networked printer from it as well as view the shared documents on other networked computers. But when I try to access google, it won't connect. I've run some virus scans which came up with nothing. Please help me!
Is the default gateway on that computer set to the IP address of the router? I'm assuming the other computers are able to get to the internet without a problem. If that is not the case, then there may be a problem with the router not being connected to your ISP.
It is supposed to get the default gateway value from the router when the router assigns its IP address (standard DHCP behavior). You can use ipconfig /all to compare a working computer with this one to see if the values are different. Normally, the default gateway is going to be the IP address of the router.
If it is wrong, you'll need to check your TCP/IP settings for that network adapter (or wireless card). You may have it configured to use a specific value.
Interesting. I wonder if it just needed to have the DHCP settings cleared so it could get the "correct" ones from the router. From what you describe you basically did a manual version of ipconfig /flushdns, ipconfig /release and ipconfig /renew to clear the problem. :emotion-2:
wall -> cable modem -> wifi hotspot -> Netgear Fast Ethernet Swich Model: FS116 -> wifi hotspot 2 -> laptop (all connections are wired expect the one from wifi hotspot -> laptop)
We have 2 wifi hotspots in our house (the second one was free), we are using the first one as a router, and the second one can also be used as a router (but currently is not).
Is the desktop directly connected to your cable modem? If you have things set up wall -> cable modem -> router -> computers then all of your computers connecting to that router should have the same default gateway address. If the desktop is wired to the cable modem (by passing the router) then it would have a different default gateway. This is a set up I recommend you avoid, however, as most cable modems - unless they are also routers in their own right - are going to have a problem with more than one computer directly connected at some point (usually within a day or three of the second computer being connected).
Ah, there's the cause. Wifi Hotspot 2 has its own default gateway value, and all computers connected to it will use that one. Everything connected to Wifi Hotspot 1 directly (or through the Netgear switch) will use its default gateway.
I'm not sure what just happened. I manually set the IP Address on my laptop (where the internet didn't work), and then set the Subnet Mask, Default Gateway, and Primary and Alternative DNS Servers on it to match those of my desktop (where the internet did work). Then I tried to load google, but it wouldn't load. Then I told my laptop to automatically set its IP Address, Subnet Mask, Default Gateway, and Primary and Alternative DNS Servers, and I clicked on "repair connection." The internet then started working again, even though my laptop's Default Gateway and my desktop's Default Gateway are different now.
I have no idea. All I know is that my internet is working properly now. But do you know how the internet is working on both my laptop and my desktop even though they have different Default Gateways?
Larry R
2 Intern
•
1689 Posts
483
0
Posted January 6th, 2009 12:00
Is the default gateway on that computer set to the IP address of the router? I'm assuming the other computers are able to get to the internet without a problem. If that is not the case, then there may be a problem with the router not being connected to your ISP.