UNSOLVED
M
mattstanding
7 Posts
0
1280
March 7th, 2017 03:00
VoIP QoS
Hi,
I have just installed a DELL N4032 into our environment to act as a L3 switch to route VoIP traffic from a voice VLAN to a data VLAN where the PBX is located. The VoIP and data traffic are directly connected to a CISCO 2960 series L2 switch via a 4 x 1GbE EtherChannel to 4 x 1GbE port-channel on the DELL switch:
My problem is that if a hammer the connection VoIP handsets loose their connection to the PBX. My thought is that if I configure QoS for the voice VLAN it will resolve the issue.
Can any offer some starting points for configuring QoS?
Thanks in advance,
Matt
vt1012
212 Posts
956
0
Posted March 7th, 2017 07:00
Matt,
The guide in the link below looks promising, you may want to start there: http://en.community.dell.com/techcenter/extras/m/white_papers/20439292/download. The User Guide and CLI Guide for the Dell N4032 might also show some examples as well. Both of those can be downloaded from the support site, www.dell.com/support.
Hope this helps.
-B