‎VLAN under fiber | DELL Technologies

Start a discussion

UNSOLVED

Trebel

updated

19 years ago

Trebel

10 Posts

0

6637

August 27th, 2007 10:00

VLAN under fiber

Hello, Is it possible to configure an isolated VLAN between two 3448 connected via fiber cable? Thanks!

N
nlspears
52 Posts
220
0
Posted September 7th, 2007 11:00
Based on the little detail you provided in your question, yes, you can create an isolated vlan with two 3448 connected switches.

Can you expound on your question?
T
Trebel
10 Posts
220
0
Posted September 7th, 2007 18:00
Hi,

What I need is to create a new VLAN, let's say VLAN 2.
All ports on both switchs must be part of VLAN 1, except port 1 of both switch which must be VLAN 2.
Both switchs are connected thru a fiber cable on port G1.
Traffic on VLAN 2 must be issolated to all ports on VLAN 1.

I hope this info is enough to let you help me!

Thanks in advance.

Message Edited by Trebel on 09-07-2007 09:09 PM
N
nlspears
52 Posts
220
0
Posted September 7th, 2007 19:00
Okay,

What you will need to do is create vlan 2 on both switches. Then add the port 1 of each switch to vlan 2. You will also need to change the G1 ports on each switch to trunk mode and add them to vlan 1 and 2. That should be it.
T
Trebel
10 Posts
220
0
Posted September 8th, 2007 04:00
Hi,

When adding port 1 on both switchs to VLAN 2, which type must I use, tagged, untagged?, and for the G1 ports?

Thanks