UNSOLVED
HL
Htoon Linn
5 Posts
0
753
December 23rd, 2020 19:00
S4148U-ON how to stack?
I have the following components.
SCv3020 (dual-controller)
S4148U-ON = 2 switch
DAC-QSFP28-100G = 2 cable
I would like to use an active/active storage system.
So these two switches need to stack and which protocol should I use?
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
630
1
Posted December 24th, 2020 10:00
Hello Htoon Linn,
You don’t want to stack your switches if you are going to connect both switches to your SCv3020. Here is a link to Switch Configuration Guide for Dell EMC SC which has our best practices for networking. https://dell.to/38CSkxb