Proper Method to Restore Running, Startup and Firmware to PowerConnect 6224
Switch
Hello All,
I have a PowerConnect 6224 switch in production that is configured exactly the way I want it. I have a new PowerConnect 6224 switch that I want to restore the config to; is that possible? My goal is to not have to manually enter settings for every single switch.
I attempted a few methods but they do not seem to work. If someone can tell me the correct procedure or point me in the right direction that would be great!
connect to your working switch via telnet or terminal session
show running-config and press any key till it all displays
scroll back to top and copy the entire running config and paste into Word
edit the document to remove the text "--More-- or (q)uit"
save the document and when you want to deploy it to another switch edit the Ip address and the Ip default-gateway
connect to the new switch via terminal\console
reset to defaults
copy the new text from the word document an paste in the terminal session to the new switch
Voila ! ! ! the new switch now has the exact config as the backed-up
you can edit the word document further for more changes before pasting to new switch (e.g. different vlans, different port descriptions, vlan membership, receivers etc)
Alestan
7 Posts
9318
0
Posted May 8th, 2014 14:00
Perfect thanks!