UNSOLVED
N4032 ACL Supported
Hi All
I have two N4032 switch (ver. 6.1.2.4) and they are stacking. Each of them has one 10GbE SFP+ module.
I try to apply ACL on interface port 17. I apply acl8, it is working.
Then I apply acl1 on port 17, I got the message "HW limit may have been exceeded."
How many rules can apply on N4032?
N4032 ACL Spec. is
Max number of ACLs: 100
Max ACL rules system-wide: 3,072
Max rules per ACL: 1,023
Max ACL rules per interface (IPv4): 2,047 (ingress), 1,023 (egress)
Max ACL rules per interface (IPv6): 1,021 (ingress), 512 (egress)
Max VLAN interfaces with
ACLs applied: 24
Thanks.
844
0
Posted January 26th, 2015 19:00
If you remove ACL8 from the interface, will it then let you add ACL1? ==>Yes
844
0
Posted January 29th, 2015 00:00
I encounterd the problem that I can't apply 2 separate ACLs (The ACL8 and ACL1, which I mationed before ) on those two stacking switch. (Those two switch use 10gbE SFP+ module to form satcking)
But, I try to use one N4032 switch, apply the 2 separate ACLs, it is workable. I try to create another ACL with 1023 rules, apply this ACL to interface, it is workable, too
Thanks.
chinghui
1 Rookie
•
43 Posts
844
0
Posted January 26th, 2015 08:00
The acl1 applied as an ingress, also. Tha ACL does not have any ranges in it. for example, I used "permit tcp any any eq 23"