the port where the phone server is (gives out dhcp for phones) is set with pvid 60 (so i changed the native vlan)
the phones only work if i change the native vlan to 60. (get an ip address) but we require to have a pc plugged into the phone and then the phone get an ip address from windows dhcp. (this is not working)
any ideas on how to get the phones and data to all play nice?
What kind of phones are you using? We are using Mitel Phones and are running them on 3548p's with the following port config (100 is data, 300 is voice):
switchport mode general switchport general allowed vlan add 100,300 switchport general pvid 100
The phones do the rest, sorting tagged packets from vlan 300 and passing untagged 100 on to the data port. We didn't end up having to do anything special with the voice VLAN (although I'm not saying that is a bad option, just didn't apply). Also when a computer connects straight to the port, without a phone in the middle, they are still able to access data on vlan 100.
dirkdigs
2 Intern
•
192 Posts
1611
0
Posted August 28th, 2013 12:00
i have 3000 series switches. this does not apply.