UNSOLVED
6024 VRRP Question
I have two 6024's with VRRP configured. Here's a basic example of how it's setup:
Switch 1 (Master)
Physical IP 10.100.2.2
VRRP IP 10.100.2.2
Switch 2 (Slave)
Physical IP 10.100.2.1
VRRP IP 10.100.2.2
From my desktop I can only ping 10.100.2.2, not 10.100.2.1. Is this by design?
Even if I remove VRRP on a VLAN I can not ping the slave switch on that VLAN's IP.
Switch 1 (Master)
Physical IP 10.100.2.2
VRRP IP 10.100.2.2
Switch 2 (Slave)
Physical IP 10.100.2.1
VRRP IP 10.100.2.2
From my desktop I can only ping 10.100.2.2, not 10.100.2.1. Is this by design?
Even if I remove VRRP on a VLAN I can not ping the slave switch on that VLAN's IP.
ZippySLC
19 Posts
134
0
Posted June 13th, 2006 12:00