UNSOLVED

RussellJ1

updated

19 years ago

R

RussellJ1

15 Posts

0

824

September 13th, 2007 07:00

Legato 7.4 with VMS on Alpha

we were succesfully able to complete a client initiated backup and restore, but we are unable to start a backup from the server. we get two different errors,

if the save set is listed as "ALL" we get:
Probe job had unrecoverable failure(s)

if we define the save set we get
logfile has no output
: Permission denied


we can ping, we've set host files up, and it works when the client starts it, but it refuses to work when the legato server starts it.
  • dk3

    163 Posts

    399

    0

    Posted September 13th, 2007 09:00

    Did you set up /nsr/res/servers file? The error messages indicate that Networker server is not authorized to start a backup on client...
  • RussellJ1

    15 Posts

    399

    0

    Posted September 13th, 2007 11:00

    i had just double checked that and decided to put all the possibly host names in there

    client.domain.com
    client
    CLIENT.domain.com
    CLIENT


    still no luck. i also installed 7.3.3 sp3 to see if that would work, no dice there either.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    399

    0

    Posted September 13th, 2007 12:00

    What VMS client are you using and did this ever worked for you?
  • RussellJ1

    15 Posts

    399

    0

    Posted September 13th, 2007 13:00

    not on this version of networker. we've been running client version 2.0.x (wompus ware) for years against networker 7.1.3

    we're doing platform testing to see if we will be able to upgrade to an up to date verison of networker. what confuses me is that the client initiated backups and recoveries work with no problems.

    Message was edited by:
    RussellJ
  • IKP1

    198 Posts

    399

    0

    Posted September 14th, 2007 06:00

    Is there a specific reason to use server file entries?

    Have you tried this with no entries in the server file ?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    399

    1

    Posted September 14th, 2007 07:00

    I don't think that version can work with 7.4 - you will need to apply current revision of VMS client which is 7.3.x based.
  • RussellJ1

    15 Posts

    399

    0

    Posted September 14th, 2007 12:00

    I was afraid you were going to say that.

    I'll directly contacting EMC support next week to verify. thanks for the help so far.