UNSOLVED

BKCMTB

updated

21 years ago

B

BKCMTB

2 Posts

0

7015

December 15th, 2005 23:00

Three, going on four monitors??

I have an XPS Dimension desktop running XP Home. I have had the flat screen monitor (1800FP) replaced on three occasions due to following malfunctions. The screen goes blank, the on or power light turns amber and then I get a dialoge box that says "DVI Power Saving Mode". I am using the DVI cable and have inspected it for bent pins. The regular D-Sub monitor cable works fine and I get a picture. Am I just having really bad luck with refirbished monitors or is there potentially something wrong with the CPU? Any insight would be greatly appreciated.
  • BKCMTB

    2 Posts

    140

    0

    Posted December 17th, 2005 22:00

    Thanks for the help. I did try the procedure just as you described and per the Dell tech. Still nothing. So, for the third time, they are sending me another "refurbished" monitor which will only last for 3-4 months and then I'll go through this again.
  • Timmaay

    9 Posts

    140

    0

    Posted December 17th, 2005 22:00

    Hi, I too had this problem with my 20" Dell Widescreen, at first I thought it was a bad video card or monitor or even a bad DVI cable, but after many tests, (having dell send me a new DVI cable and trying other monitors) I talked with a dell rep and he told me to shut everything down, PC and Monitor, then first turn on the monitor, then the pc, I didn't think this would do anything, but sure enough right away I had picture. I guess it has to do with the computer reconizing the monitor, sometimes it doesnt catch it, but this should help, Hope it solves your problem!
  • Timmaay

    9 Posts

    140

    0

    Posted December 17th, 2005 22:00

    Damnn, sorry man, hope the new one last longer.