Here is a pic:

http://i130.photobucket.com/albums/p241/match000/monitor_small.jpg

By the way those are the default values if anyone needs them (anyone who accidentally messed up their RGB's!)

Based on other reports of panel properties - most likely LG.Philips S-IPS.
BTW, the color values in the service menu vary from monitor to monitor.

The A03 PVAs have started showing up. The code for the PVA sceen is: PM330

RT803 is S-IPS.

Two PVA panels in a row showed up in hardocp forums, so I would say the panel lottery begins in earnest now.

Thanks for the info on the service codes. Yay, I received a S-IPS. For anyone interested, I ordered it with a Dim 9200 at the end of October.

Oh, and the back says Made in Mexico, and October 2006 Manufacturing date. It does not state the revision right above Made in Mexico, as I have seen on the 2007 FPW's at school (those say clearly A02, but they were made in 2005)

Message Edited by ballista on 11-04-2006 05:49 PM

All,

The Burnin Mode should be OFF. I would like one of you to use the Reset Defaults option in the Service Menu to see if those settings change. Or, I can do it in the lab on monday.

2007 Service Menu defaults -
Burnin Mode = Off
Offset 1 = Red 319 Green 231 Blue 250
Offset 2 = Red 87 Green 66 Blue 70
Gain = Red 382 Green 396 Blue 393
PC Blue Preset = Red 203 Green 234 Blue 237
PC Red Preset = Red 235 Green 234 Blue 198
PC Normal Preset = Red 241 Green 255 Blue 251
MAC Normal Preset = Red 241 Green 255 Blue 251
DDC-CI (ISP) = On
iTest = On
Soft Dither = On