I have a Dimension 2350 with an E151FPp monitor. I've tried to upgrade from Windows XP to Windows 7, but discovered that Windows 7 does not seem to recognise the monitor and won't allow me to change the screen resolution or othe screen settings. Is there a way around this without reverting to Windows XP?
The problem is most likely with your video adapter, not the monitor. You need to search for a video driver for the integrated graphics in your system. Obviously, Dell does not support Win 7 in that system so you'll need to locate a 3rd party driver.
First, Have you checked compatibility? Just an FYI for you.
It is always best to check with the software manufacturer FIRST. They will tell you if they have tested the product and the version, as well as whether or not it will work with Windows 7. Check out the Windows 7 Compatibility site: (There you will find out about hardware and software compatibilty.) http://www.microsoft.com/windows/compatibility/en-us/default.aspx There is a pulldown from which you can choose "hardware" and "software".
In any event a lot of the times, Vista drivers will work in lieu of Windows 7 drivers, however, it's not 100%!
As stated previously, it's best to have the Windows 7 certified drivers installed.
Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assitance and support.
Thanks again, John M. Microsoft Windows Client Support
osprey4
6 Operator
•
34230 Posts
379
0
Posted February 21st, 2010 05:00
Hi, betchworth01:
The problem is most likely with your video adapter, not the monitor. You need to search for a video driver for the integrated graphics in your system. Obviously, Dell does not support Win 7 in that system so you'll need to locate a 3rd party driver.
Good luck!