Help

Start a discussion
UNSOLVED

Peter.A.H

updated

20 years ago

PA

Peter.A.H

11 Posts

0

15142

May 29th, 2006 00:00

Dell 2007WFP

Could someone re-post how to check the manufacturer (ie. LG or Samsung) of the Dell 2007WFP?  Thanks in advance.
  • H

    hocusfocus

    11 Posts

    808

    0

    Posted May 29th, 2006 00:00

    1 Turn off with power button

    2 While pressing menu and +, turn on with power button

    3 When it "green lights" wait about 1 sec and press the - button

    I have an "LPL"  which I suppose means it's an LG panel. If it has Sam, then you have a Samsung PVA.  I'm not sure if I have a PVA if it's an LG.

  • G

    gpro

    2 Intern

    •

    2024 Posts

    808

    0

    Posted May 29th, 2006 08:00

    for the 2007WFP you should see: LPL WSXGA LM201W01

    LPL = ?
    WSXGA refers to the resolution (ie Wide SXGA)
    LM201W01 is the panel model (LG.Philips S-IPS)

    ALL 2007WFP use this panel (so far, anyway)
  • S

    SpookyNeo

    5 Posts

    808

    0

    Posted May 29th, 2006 11:00

    The LPL LM201W01 is the second version of the panel in the 2005FPW.
     
    According to a website that I trust, Dell is always changing the panel in the 2007WFP and it *should* be a LM201WE2, the same as the Nec 20WGX².
     
    But the 2007WFP they got had the LM201W01 which isn't as good as the LM201WE2.
     
    So if you order a 2007WFP, you don't know which panel you will get. FYI, the Nec one is the best 20" panel for gaming and most all the stuff.
     
    Is there a way to know the panel BEFORE buying the LCD ?
  • A

    Auriacan

    3 Posts

    808

    0

    Posted May 29th, 2006 16:00

    I can't seem to get this thing to show,

    I turn it off, hold down menu and +, then turn the monitor back on, wait for a bit, then press the - button. and I get my normal desktop. Maybe I'm just not with it?
  • A

    Auriacan

    3 Posts

    808

    0

    Posted May 29th, 2006 20:00

    Thanks!
  • B

    bytor65

    1 Rookie

    •

    211 Posts

    808

    0

    Posted May 29th, 2006 20:00

    Hold + and Menu down until the monitor is fully booted up. Release

    Then wait for DSUB/DVI connector graphic to disappear. Then press -.
  • H

    hocusfocus

    11 Posts

    808

    0

    Posted May 29th, 2006 21:00

    In the "factory menu" , I have DDC-CI (ISP), Burnin Mode, Debug Mode. Should these be all on or what? How do you tell what is chosen? Is it white or blue to tell if it's selected?
    TIA
    HF
  • W

    Westicle

    13 Posts

    808

    0

    Posted May 31st, 2006 03:00

    just got mine today and it is BO1C18 SAM UXGA LTM201U1 Made in China and Rev A00 made april 2006.

     

    sending it back to get the flash done, allready PM'ed ChrisM

Dell Support Resources

Latest Solutions

View More