UNSOLVED

riverwater

updated

23 years ago

0

7938

May 27th, 2004 14:00

DELL 2001 FP problem after turning on computer

I am using DVI to connect my 2001FP to my XPS PC, which has 256M ATI 9800XT. I noticed that within several minutes turning on the PC, the LCD screen shows a huge number of "bad pixels", in color red, green and blue. After another several minutes, all the bad dots would be gone. Another solution is turn off/on the monitor, Any idea how to deal this problem?
  • JDre

    1319 Posts

    384

    0

    Posted May 27th, 2004 14:00

    Try running the monitor in self-test, see if those pixels show up and disappear. If none, possible video card or driver problem.
  • 384

    0

    Posted May 27th, 2004 15:00

    how to run the monitor self-test?
  • MrRetro

    22 Posts

    384

    0

    Posted May 27th, 2004 16:00

    I think that in the driver options for the ATI videocard, you can check off "Reduce DVI Frequency" or something similar to that and your problems should be gone.  This worked for me.
  • 384

    0

    Posted May 28th, 2004 13:00

    I have tried this "reduce DVI frequency", but the problem still here.

    I noticed that the huge number of bad pixeles were on for several minutes, then the monitor tunrs whole black for a second, then everything back to normal.

  • Sterndogg02

    88 Posts

    384

    0

    Posted May 28th, 2004 19:00

    After updating vid-drivers I notice for about 5 seconds the screen (2001FP) is all crazy with blue, green, red, etc. lines and dots. It then clears up and it is fine. Only does it once after updating ATI drivers (9800XT).