UNSOLVED
2407wfp no display during post and until windows logon
Hello,
I was wondering if anybody had the same problem? There is only a blank screen until the windows 98(SE) logon. I am using an old Pentium 3 on a BX motherboard with a ATI 7500 video card. It is connected by DVI-D. Any help appreciated.
I was wondering if anybody had the same problem? There is only a blank screen until the windows 98(SE) logon. I am using an old Pentium 3 on a BX motherboard with a ATI 7500 video card. It is connected by DVI-D. Any help appreciated.
- This seems to be a problem with older ATI cards. It has been fixed with a BIOS update for some. See explanation here:
BIOS and powerup screens aren't visible but monitor works fine in Windows
Message Edited by gpro on 07-03-2007 02:04 PM - Hello, I've switched to the VGA input and the pre-Windows screen is visible, but the picture isn't as clear as the DVI-D input. I am not game enough to flash the video bios. I think I'll just swap inputs if I need to access the bios on boot-up. Thanks for the help.
Message Edited by Aldoc103 on 07-05-2007 06:04 PM
Aldoc103
3 Posts
607
0
Posted July 3rd, 2007 02:00