
UNSOLVED
B
bigworld005
52 Posts
0
21044
October 29th, 2009 20:00
Verical lines on Inspiron 6400 screen
hi,all,
there are 3 vertical lines appeared on the right side of my Insprion 6400 screen. it starts from 1 and later turn into 3 , probably 4. but if I hook a 2nd monitor to the laptop, there are no lines at all. and if I till the screen at a specific position, all the lines disappear too. this position is between 90 and 180 .
I think my video card and display panel must be all right but some connection must be loose. I suspect that it is either the cable between the mother board and the screen, or the connectors behind the panel. but the former is not possible because I pressed the cable connecting to the motherboard, the lines are still there.
anyone has suggsestions?
thanks,
t.z.
Responses (3)
Solutions (0)
bigworld005
52 Posts
247
0
Posted October 30th, 2009 09:00
yes, you are right. the lines first appeared on the very right side edge, and they are still there now, a whole bunch of them. I didn't mention it because I think these lines do not interfere the image/view too much.
so if I have to replace the panel, do I need to replace the inverter too?
thanks,
t,z
If you use exactly the same panel and the brightness is OK, you can reuse the inverter. If you use a different model screen, you'll likely need a different inverter and data cable, so be sure you get those parts with the screen (and be sure the screen is known to have shipped with your model of system - they are not universally interchangeable).

ejn63
11 Legend
•
87469 Posts
•
321256 Points
247
0
Posted October 30th, 2009 07:00
The screen has developed faults, probably at the edges. You'll need to replace it - faults like this one cannot be repaired.