
UNSOLVED
Closed
J
Jay25Crawley
4 Posts
0
9618
September 25th, 2008 10:00
Studio 1535 no AC3/DTS Pass through for 5.1 surrond via HDMI
Dear all,
I recently ordered a Studio with Blu-ray for the express purpose of having a feature rich movie machine. I am connecting the system to a Sony STR-DA5300ES receiver which supports the latest Audio standards including DTS-HD, Dolby true-HD as well as the older Dolby 5.1 and DTS formats. However, I was upset to find that the Studio cannot output 5.1 surround via the HDMI connection.
Reading some forums, its seems I may be able to resolve this issue by uninstalling the IDT advanced Audio that I purchased, and by installing the ATI HDMI Audio Drivers. Does anyone know if this will work?
The system includes the ATI HD3650 and annoyingly the Dell Media Direct Software has the logos even for the new formats (DolbyTrue-HD etc)
Hopefully someone can help, it seems pointless selling Blu-ray with a notebook, if certain films are inaudible because of their soundtrack.
Am I correct in thinking the laptop soundcard doesnt need to handle the formats as my AMP is doing the encoding with Pass through? I am using the included Dell Media Direct 4.0 and Vista Media Center.
Best regards
James
Responses (1)
Solutions (0)

Luciden
6 Posts
168
0
Posted July 16th, 2009 21:00
I posted instructions for setting this up with a 4570 but it's somewhere on this forum and I can't find it. You do need the Realtek AtI HDMI Audio Drivers. Once you configure that correctly (enable DD5.1, etc...) you have to play with whatever BRD player your using to get it to work.
If you're using PowerDVD DX you have to select S/PDIF as the output even though it's output of HDMI. I know it will at least put out DD5.1 and DTS but TrueHD depends on your HDMI spec and potentially other stuff.