UNSOLVED

bercikj

updated

22 years ago

Closed

B

bercikj

7 Posts

0

6435

November 3rd, 2004 14:00

Set glidepath speed from command line?

My X200 seems to suffer from mouse driver sharing.  I use the glidepath AND an external USB Logitech Optical Mouse.  When I change the speed of one it affects the other.

Is there a way to INDEPENDENTLY set the speeds of these two.  If not, is there a way to run a command line to change the speeds manually so that when I want to change the speeds I could just double click on an icon to run the command rather than having to navigate the mouse gui every time.

Thanks

  • Manh

    146 Posts

    293

    0

    Posted November 3rd, 2004 19:00

    That is a function of windows.. you only use 1 mouse.. Despite the fact that a laptop can have 2 more mouse devices attached, therefore the speed of all devices are set at the same time.  So the answer to your question is no, you can't set them independently.
  • bercikj

    7 Posts

    293

    0

    Posted November 4th, 2004 14:00

    May I submit that this is a bad thing. I should be able to set the glidepath to work so I don't have to move my finger across it 5 times to get across the screen to match the setting of a good usb mouse setting.

    If I set the glidepath to the fastest it works great but then the mouse is totally unusable with the pointer going nuts off the screen with a slight move.

    The drivers need to be independently adjustable. Thanks !
  • talltim

    8 Posts

    293

    0

    Posted January 17th, 2005 13:00

    I would have to agree with you! I can't really think what you can do about it tho :-(