
UNSOLVED
Closed
R
rob_caldecott
5 Posts
0
7357
June 27th, 2004 18:00
Problems using USB drive devices
I have an Inspiron 8100 running XP SP1 and I have a problem when using any USB or FireWire device that installs a generic disk drive (for example, digital cameras, USB keyfob disks, etc.). When I attach a device like this, the new disk drive will NOT appear in My Computer, yet if I launch a command-prompt, I can change to the drive and see the files. If I use the "Safely Remove Hardware" option to stop a device such as this, then the PC will hang. Also, if I attempt to shutdown the PC once I have attached one of these devices, the PC will hang. If I right-click on "My Computer" and select "Manage|Disk Management", then the Computer Management app will hang.
The only way to make a device like this to work is to reboot my 8100 with the device attached. The new drive will then appear as expected and everything works fine.
Note that USB devices that do not install additional drives (such as scanners, DSL modems, mice, etc.) work fine and can be stopped via the "Safely Remove Hardware" option.
AFAIK this problem has always existed on my machine. Two devices I have tried (a Sony DSC camera and a MaxiStor USB drive keyfob) works fine when attached to a colleagues Inspiron 8200.
I have tried removing drivers for these devices to no avail. Has anyone else seen this? It is driving me nuts! Having to reboot every time I need access to either my Sony DSC or my Lacie FireWire drive is really frustrating.
I reported this problem once before but received no response - I hope I get better luck this time!
Responses (6)
Solutions (0)
speel ref numbe
8 Posts
565
0
Posted July 29th, 2004 19:00
yep
http://forums.us.dell.com/supportforums/board/message?board.id=insp_periph&message.id=7780
same problem that I have with inspiron 8600.
Hans-Ceesrob_caldecott
5 Posts
565
0
Posted July 30th, 2004 11:00
I think quite a few Inspiron owners are suffering from this problem - and I think it might be BIOS related (I have the latest A15 version installed). I wish Dell would comment though as their silence on this issue is most frustrating!I was just as frustated as you, but my problem with the external harddrive was solved by giving it a little more power. It seems that my laptop initially provides an adequate power level, but reduces it after a few minutes, which means the device appears 'available' in WinXP, but trying to access it brings up a blues screen.
Try getting a cable that plugs into TWO USB sockets (the second one for power) or plug in an AC adaptor if possible.
rob_caldecott
5 Posts
565
0
Posted July 30th, 2004 12:00
As I also get this problem with my FireWire port (with a Lacie drive attached that has its own power supply) I don't think this is the problem.speel ref numbe
8 Posts
565
0
Posted August 1st, 2004 17:00
Hi,
I solved the problem where my inspiron 8600 got a blue screen when a usb external
cardreader was ejected or just added.
I did four things:
1. go to hardware list and search for new drivers. Thisd did not solve it
2. downloaded latest dell software
3. de-installed all programs for4m the vendor.
4. In the bios disabled floppy device and usb-emulation.
I think the last one did the trick but cannot prove that.
cheers
Hans-Cees

nfprehn
5 Posts
565
0
Posted July 20th, 2004 14:00
Also see:
http://forums.us.dell.com/supportforums/board/message?board.id=insp_periph&message.id=7648&c=us&l=en&s=dhs&cs=19