‎No boot up: | DELL Technologies

Start a discussion

UNSOLVED

orionpex

updated

23 years ago

Closed

orionpex

5 Posts

0

8543

January 6th, 2004 01:00

No boot up:

Help,

My Dell CPx was working fine at work... I packed it up and took it on home.. however when i attempted to turn it on

I get nothing but the power light which will not turn off unless I eject the battery......

I mean nothing ... no HD starting no Fan.......

What can I do to fix this...

M
MarkHayden
8 Posts
218
0
Posted January 7th, 2004 13:00
What do the three green lights do upon switching the machine on ?
O
orionpex
5 Posts
218
0
Posted January 7th, 2004 14:00
well the power lights comes on and stays steady when using the power plug then it switches to the battery light and goes off.

when using the battery the power light stays on and does go off until i pull the battery out.....

I
B
bieberle
8 Posts
218
0
Posted January 20th, 2004 22:00
I am having the exact same problem with my latitude cpi a series. Once in a great while it will start and I will get an error message

Manufacturing Mode Level 001

Press Fn X to continue
F
fiveohhh
6 Posts
218
0
Posted January 21st, 2004 21:00
I got the exact same problem on my cp, same thing happened with a refurb MB and new proc. so either i'm an idiot(very possible, or its something besides the mb/cpu combo
B
bieberle
8 Posts
218
0
Posted January 23rd, 2004 21:00
According to the knowledge base, if the MNT jumper pins are shorted it will continuously execute the POST routines (manufacturing maintenance mode). The only system planar I can find to show me where the MNT jumper is located is for a desktop. I don't even know if my latitude has an MNT jumper. Can someone help me with this or maybe know where I can get a system planar for a latitude CPi A series?