UNSOLVED

Dell1440

updated

15 years ago

D

Dell1440

2 Posts

0

4132

October 26th, 2011 08:00

laptop screen go black, external still work

accidentally touch the connector between video cable and mother board with screendriver.  Now the laptop screen go black but the external vga port still work. My friend said if external video works, the video card is not demaged, it is the lcd short out.  It is true?

From the other post, replace the screen is do able, replacing the whole mother board is not worth it.

Need advice.

Thank.

 

  • Victor

    1 Rookie

    •

    86 Posts

    434

    0

    Posted October 26th, 2011 18:00

    If the LCD is black and a external monitor works, the LCD has to be replaced. Regards

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    434

    0

    Posted October 26th, 2011 18:00

    Exactly what was shorted by the screwdriver?  If it was the connector on the mainboard - not the screen - it's far more likely the high-power circuit to the backlight was damaged (meaning you would need the system board).

  • Dell1440

    2 Posts

    434

    0

    Posted October 27th, 2011 07:00

    Thank.

    Seems to be the case.

    Tried to replace the touch pad, so need to disconnect the video cable.  When I pulled the blue tab, it is kind of tight.  Put a little screwdriver there to give it a push but forgot to take out the battery first.  A small spark at the connector.  I knew i blew it.
    Anyway to power the back light again without replacing the system board?
    How much to repair the board?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    434

    0

    Posted October 27th, 2011 08:00