
UNSOLVED
Closed
F
FranzGeorg
1 Message
0
5502
June 2nd, 2002 09:00
Cannot dock 8200
I can't dock my Inspiron 8200 to a port replicator.
My notebook's lock is covered by a small plastic panel. Should I remove it?
My notebook's lock is covered by a small plastic panel. Should I remove it?
Responses (5)
Solutions (0)
jingyenshiau
239 Posts
225
0
Posted August 17th, 2004 16:00
(1) Disconnect your laptop's power (as usual). Personally, I'd remove the battery, too.
(2) Remove the plastic cover strip (the one with a vent on the right and a hole for the power button on the left) above the keyboard. You can insert a flat screw driver in the gaps along the sides and pop up the cover strip.
(3) In the exposed area you'll see two screws holding a metal plate (it's not plastic...). Remove those two screws and the metal plate. Put the plastic cover strip back. Your work is done.At least that's how I did it -- well, as far as I can remember.

Cynthia
1 Rookie
•
97 Posts
225
0
Posted June 5th, 2002 18:00