UNSOLVED

emeka44

updated

20 years ago

Closed

E

emeka44

2 Posts

0

11362

February 22nd, 2007 22:00

BSOD Trying to install XP on brand new Inspiron E1705

I am brand new to the forums so please bear with me. I just got a brand new Inspiron E1705 and I want to install Windows XP on it. I am trying to do a clean install, so I am booting from the XP CD. It is a very old version of XP but I tested the CD on another system and I am able to get further than I can on the new Inspiron. Windows setup loads all of the initial files but at the part of the DOS mode setup where it finishes loading all of the initial files and says on the bottom, "Setup is starting Windows" it bluescreens:
 

0x0000007E (0xC0000005, 0xF76120BF, 0xF7A5E208, 0xF7A5DF08)

*** pci.sys - Address F76120BF base at F760B000, Datestamp 3b7d855c

 

Can anyone help?

 

Thanks in advance

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    178

    0

    Posted February 22nd, 2007 22:00

    In order to install on the newer SATA-drive systems, you must have an XP CD with Service Pack 2 on it. Call Dell - they will ship you the CD for the system for free. Alternatively, you can prepare a slipstream CD with SP2 on it, but the CD MUST have SP2 on it to install. http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp
  • bctinc

    17 Posts

    178

    0

    Posted March 1st, 2007 22:00

    Hello emeka44,
     
    I just received my new Inspiron e1705 with Vista Home Premium and really want Windows XP Pro instead. I have an original (non-Dell) Windows XP Pro CD and ran into the same problem. I have spent many hours with Dell support and websites and have just (tonight) run into this potential solution of creating a slipstream XP/SP2 CD. I'm doing this now.
     
    Let me know if works for you, too, OK?
     
    TTYL
     
    Rob
     
  • bctinc

    17 Posts

    178

    0

    Posted March 4th, 2007 11:00

    Hi,
     
    I've tried to create a slipstream CD e.g. first copied WindowsXP to folder on HD, then copied SP2 to another folder on HD, then ran the update utility to update XP with SP2, copies .img file and then burned to a bootable CD.
     
    When I try to boot-up on this new CD, I get a Boot: 4 error and it doesn't boot. I burned CDs on two different machines using two different CD burning software. Still no good.
     
    The only thing that might work is that Microsoft has a free download for their Virtual PC product (which I used on a Macintosh years ago). I downloaded it and it worked first time.
     
    Now to try and dual-boot the e1705 with Red Hat Linux Enterprise WS 4 which is what I really need for work-related stuff.
     
    TTYL
     
    Rob
    rob@baseclasstech.com
  • bctinc

    17 Posts

    178

    0

    Posted March 14th, 2007 17:00

    After repeated attempts, I finally managed to burn a slipstreamed CD-ROM of my original Windows XP with SP2 using Nero. Works like magic. Now my e1705 is triple booted with Windows XP/SP2, Vista, RHEL WS 4. Cool! Rob