UNSOLVED

polarwind

updated

22 years ago

Closed

P

polarwind

30 Posts

0

2324

February 11th, 2005 18:00

9600PT No longer available

I had placed an order for this part like 3 weeks ago and it was canceled.
I called to find out what's up they said the part wont be available for like
5 years or something I'm like what the heck. So I had them search for another
compatible video card and they came up with a Raedeon 9800 Pro 128mb
that will supposedly fit into an Inspiron 8600. However I have an I8500.
I'm thinking that I will more than likely make the same modifications
to this card as would be needed for the 9600PT. Any suggestions or
comments would be appreciated.
  • michealo

    33 Posts

    449

    0

    Posted February 11th, 2005 19:00

    i would be very, very curious to find out of a 9800 will fit into a 8500 inspiron

    i severly doubt it tho
  • warmonger

    179 Posts

    449

    0

    Posted February 12th, 2005 00:00

    Just keep calling Dell spare parts untill one is sent, they just gave you a bull story about a 5 year BO, Also the 9600 is the highest available for the 8600, the 9800 and 9700 are different form factors and will not fit the 8600....

    Specs 8600 1.7 , 128Mb Nvidia 5650FxGo

    Message Edited by warmonger on 02-11-2005 08:13 PM

  • polarwind

    30 Posts

    449

    0

    Posted February 12th, 2005 02:00

    That's what I was thinking because I was like I could order a 8600 and get this card why
    can't you just send me one. I made the guy verify 3 times that the 9800  will fit into the system.
    I'll know if it does or not when I look at it, there's also a two week return. I'll know
    the first day I get it if it will fit.
     
    Is the 128Mb Nvidia 5650FxGo just as good? I mean that will fit for sure
    and if it is just as good then I will call them monday and cancel my order and
    order that instead. Let me know.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    449

    0

    Posted February 12th, 2005 10:00

    The 9800 is not available for the D-chassis Dell, and I don't think they ever offered a 128M 5650.

    It may be that because production is ending on the AGP 8600/D800 systems, the 9600 will become very hard to find - Dell has to keep enough around for warranty repair, but the new systems use PCI Express, so prices on the 9600 AGP for the D-chassis are likely to skyrocket as demand outstrips supply, which is what usually happens with terminal upgrades.
  • polarwind

    30 Posts

    449

    0

    Posted February 13th, 2005 00:00

    So what should I do?

    Obviously I need to cancel that 9800 cause it wont fit I kinda knew that from the start.  Should I just keep trying to order the 9600PT? Despite what they say, I mean they will place the order but they are all like, "There is a possibility that this order will be canceled." Should I just keep trying until they finally send it or what? I think it's stupid, I'm PAYING FULL PRICE for this card you'd think they would freaking just sell/send it to me. LOL or maybe I should just order a freakin 8600 and swap the cards put my 4200go 64mb in there and keep the 128mb lol. ug! I really want this card.... I just had to order the 8500 what was it 2-3 years ago? back when it was the best.................................................... 

    More comments and opinions would be appreaciated.

  • andy2434

    133 Posts

    449

    0

    Posted February 14th, 2005 03:00

    The ATI MR9600 PT works great on the i8600. I swapped mine out some 3 weeks ago. It was quite difficult to get. Dell gave me the run around more than once. Here is one. This is one of the best prices, which I have seen outside of Dell. Good luck!

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=6743027731&ssPageName=STRK:MEWA:IT
  • polarwind

    30 Posts

    449

    0

    Posted February 14th, 2005 06:00

    what a rush. I know its a bit over priced
    but I snagged that.  now I just need to find
    the proper items to modify the card. for
    my i8500.
     
    I know about the bay-wolf tutorial.
    Does anyone know where  to find
    like the artic silver etc...?
  • andy2434

    133 Posts

    449

    0

    Posted February 14th, 2005 22:00

    Comp USA has the Artic Silver. The copper can be had at a local sheet metal contractor's shop. They may not have 1.5mm thick copper laying around, but 2 pieces of 16 ounce copper will work the same. You'll need 1 or 2 squares of copper cut to 1 1/8" square. The total thickness should be about 1/16" thick.

    Good luck and let us know how you did.